Where to Find the Filter on LG Top Load Washer: A Step-by-Step Guide

If you own an LG top load washer, you might have wondered about the location of the filter and its significance in maintaining the efficiency of your machine. Cleaning the filter regularly can help prevent clogs, improve washing performance, and extend the lifespan of your washer. In this guide, we’ll walk you through the process of locating and cleaning the filter in your LG top load washer.

Your LG top load washer is a workhorse that deals with a variety of laundry loads. Over time, dirt, lint, and other debris can accumulate, potentially causing clogs and affecting its performance. The filter in your washer plays a crucial role in trapping these particles before they reach the drainage system.

Why the Filter Matters

The filter is like the first line of defense for your washer’s drainage system. By capturing lint, hair, and other debris, it prevents them from clogging the drain pump and hoses. A clogged filter can lead to poor drainage, longer washing cycles, and even damage to your washer.

Gathering Your Tools

Before you begin, gather the necessary tools:

  • A small container
  • A soft brush or cloth
  • Gloves

Locating the Filter

  1. Turn Off the Washer: Before you start, ensure the washer is unplugged to avoid any mishaps.
  2. Open the Lid: Lift the lid of your LG top load washer.
  3. Find the Agitator: The filter is usually located near the agitator, at the bottom of the tub.

Step-by-Step Guide to Removing the Filter

  1. Clear the Area: Ensure the area around the washer is clean and dry.
  2. Remove the Agitator Cap: Gently pry off the agitator cap using your fingers or a flat tool.
  3. Unscrew the Agitator Bolt: Use a wrench to unscrew the agitator bolt.
  4. Lift Out the Agitator: Lift the agitator out of the washer.
  5. Locate the Filter Housing: The filter housing is beneath the agitator.
  6. Open the Housing: Rotate the housing counterclockwise to unlock and remove it.

Cleaning the Filter

  1. Remove the Filter: Gently lift out the filter from its housing.
  2. Clean the Filter: Shake off excess debris into a trash bin.
  3. Wash the Filter: Rinse the filter under running water.
  4. Use a Brush: For stubborn dirt, use a soft brush to gently scrub the filter.

Putting Everything Back

  1. Reinsert the Filter: Place the cleaned filter back into its housing.
  2. Lock the Housing: Rotate the housing clockwise to lock it in place.
  3. Reposition the Agitator: Put the agitator back into the tub.
  4. Screw in the Bolt: Use a wrench to tighten the agitator bolt.
  5. Replace the Agitator Cap: Press the cap back onto the agitator.

How Often Should You Clean the Filter

It’s recommended to clean the filter every month to ensure optimal washer performance. If you frequently do heavy loads, consider checking the filter more often.

Signs of a Clogged Filter

  • Slow drainage
  • Excessive vibration during the spin cycle
  • Clothes not being cleaned thoroughly
  • Unpleasant odor

Maintaining Your LG Top Load Washer

Regularly cleaning the filter is just one aspect of washer maintenance. Keep the exterior and drum clean, and leave the door open between cycles to prevent mold and mildew growth.

Common Misconceptions about Filters

  • Myth: Filters don’t need cleaning.
  • Myth: Cleaning the filter is complicated.

In conclusion, knowing where to find and how to clean the filter in your LG top load washer is essential for maintaining its efficiency and longevity. By following these simple steps, you can keep your washer running smoothly and ensure that your laundry comes out clean and fresh every time.

Leave a Reply

Your email address will not be published. Required fields are marked *